Image 1 of 3
Image 2 of 3
Image 3 of 3
Pioneer DJ DM-50D-BT
STUDIO MONITORS
5” Bluetooth Desktop Monitor Dpeaker Dystem
[DETAILS]
The Pioneer DJ DM-50D-BT is a pair of 2-way active desktop monitor speakers designed for DJ practice and music production. A Class D amplifier with 96 kHz DSP powers the 5-inch woofers, while a selectable switch adapts the DSP for DJ or Production use. Bluetooth 5.0 enables wireless playback, and wired sources connect through balanced 1/4-inch TRS, RCA, or 3.5 mm inputs. DECO diffusers and grooved ducts support broad high-frequency dispersion and controlled bass.
KEY FEATURES
Selectable DJ and Production sound modes
Bluetooth 5.0 wireless audio connectivity
Class D amplification with 96 kHz DSP
5-inch woofers and 3/4-inch soft-dome tweeters
TRS, RCA and 3.5 mm audio inputs
ESSENTIAL SPECIFICATIONS
Type: 2-way active speaker system
Enclosure: Bass reflex
Frequency range: 55 Hz–22 kHz (-10 dB)
Maximum sound pressure: 106 dB at 1 m, calculated peak value
Drivers: 127 mm woofer; 19 mm soft-dome tweeter
Inputs: 1 × 1/4-inch TRS, 1 × RCA, 1 × 3.5 mm stereo mini jack
Bluetooth: Bluetooth 5.0; A2DP and AVRCP; SBC, AAC, aptX and aptX Low Latency codecs
SIZE & WEIGHT
Dimensions: Lch: 175 × 262 × 257 mm; Rch: 175 × 262 × 247 mm (W × H × D)
Weight: Lch: 3.9 kg; Rch: 3.5 kg
POWER
Power supply: AC 100–240 V, 50/60 Hz
Power consumption: 25 W
Standby power consumption: 0.3 W or less
Amplifier output: Lch: 25 W / 4 Ω; Rch: 25 W / 4 Ω
Included power accessory: Power cord × 1
STUDIO MONITORS
5” Bluetooth Desktop Monitor Dpeaker Dystem
[DETAILS]
The Pioneer DJ DM-50D-BT is a pair of 2-way active desktop monitor speakers designed for DJ practice and music production. A Class D amplifier with 96 kHz DSP powers the 5-inch woofers, while a selectable switch adapts the DSP for DJ or Production use. Bluetooth 5.0 enables wireless playback, and wired sources connect through balanced 1/4-inch TRS, RCA, or 3.5 mm inputs. DECO diffusers and grooved ducts support broad high-frequency dispersion and controlled bass.
KEY FEATURES
Selectable DJ and Production sound modes
Bluetooth 5.0 wireless audio connectivity
Class D amplification with 96 kHz DSP
5-inch woofers and 3/4-inch soft-dome tweeters
TRS, RCA and 3.5 mm audio inputs
ESSENTIAL SPECIFICATIONS
Type: 2-way active speaker system
Enclosure: Bass reflex
Frequency range: 55 Hz–22 kHz (-10 dB)
Maximum sound pressure: 106 dB at 1 m, calculated peak value
Drivers: 127 mm woofer; 19 mm soft-dome tweeter
Inputs: 1 × 1/4-inch TRS, 1 × RCA, 1 × 3.5 mm stereo mini jack
Bluetooth: Bluetooth 5.0; A2DP and AVRCP; SBC, AAC, aptX and aptX Low Latency codecs
SIZE & WEIGHT
Dimensions: Lch: 175 × 262 × 257 mm; Rch: 175 × 262 × 247 mm (W × H × D)
Weight: Lch: 3.9 kg; Rch: 3.5 kg
POWER
Power supply: AC 100–240 V, 50/60 Hz
Power consumption: 25 W
Standby power consumption: 0.3 W or less
Amplifier output: Lch: 25 W / 4 Ω; Rch: 25 W / 4 Ω
Included power accessory: Power cord × 1
VERSATILE SOUND
The compact DM-40 desktop monitors bring excellent audio quality to your home setup. They inherit the best from our professional S-DJX series and Pro Audio speakers, including a front-loaded bass reflex system for a rich, tight bass and DECO* technology for a wider reach and sweet spot.
All these features are combined in a compact design making the DM-40 the perfect match for DJing, producing and simply enjoying music at home.
The DM-40 speakers are sold as a pair.
+ Main Features
Type
2-way bass reflex, active monitor speakers
Tweeter
¾-inch Soft Dome
Woofer
4-inch Fiberglass
What's in the box
- DM-40 x 2
- Power cord
- 2 m speaker cable (for left/right channel connection)
- Audio converter cable (3.5 mm stereo mini plug to RCA)
- Bottom cushion x 8
- Operating instructions
+ Specifications
Dimensions (W x H x D)
Left ch: 146 x 227 x 223 mm
Right ch: 146 x 227 x 210 mm
Weight
Left ch: 2.7 kg
Right ch: 2.2 kg
Amplifier Output
Class A/B amp: 2 x 21 W / 4 Ω
Frequency Range
70 - 30000 Hz
Impedance
10 kΩ
+ Terminals
Inputs
1 LINE (RCA)
1 LINE (Mini-jack)
Outputs
1 HEADPHONE MONITOR (Mini-jack)
RELATED PRODUCTS
STUDIO MONITORS
6.5-inch Active Monitor Speaker
[DETAILS]
The Pioneer DJ VM-70 is a bi-amplified, two-way active monitor designed for DJ practice and music production. Its Class D amplifier and 96 kHz DSP deliver a 37 Hz–36 kHz frequency range, while the aramid-fibre woofer and Vortex Bass Accelerator produce controlled, responsive low frequencies. A constant-directivity horn supports consistent mid- and high-frequency coverage. Four-position Low EQ and High EQ controls provide 16 combinations for adapting the speaker to different rooms and listening preferences.
KEY FEATURES
Class D bi-amplification with 96 kHz DSP
6.5-inch aramid-fibre woofer with Vortex Bass Accelerator
Constant-directivity horn with 1-inch soft-dome tweeter
Low and High EQ controls with 16 setting combinations
Balanced XLR/TRS and unbalanced RCA inputs
ESSENTIAL SPECIFICATIONS
Speaker type: Bi-amp 2-way active speaker
Frequency range: 37 Hz–36 kHz
Maximum sound pressure: 112 dB
Amplifier output: LF: 70 W at 4 Ω; HF: 30 W at 4 Ω
Drivers: 165 mm woofer; 25 mm soft-dome tweeter
Inputs: 1 × XLR/TRS combo; 1 × RCA
Input impedance: 10 kΩ
SIZE & WEIGHT
Dimensions: 229 × 341 × 312 mm (W × H × D)
Weight: 7.7 kg
POWER
Power supply: AC 100–240 V, 50 Hz/60 Hz
Power consumption: 45 W
Standby power consumption: 0.3 W or less
STUDIO MONITORS
5-inch Active Monitor Speaker
[DETAILS]
The Pioneer DJ VM-50 is a bi-amplified, two-way active monitor designed for DJ practice and music production. Its 5.25-inch aramid-fibre woofer, 1-inch soft-dome tweeter and bass-reflex cabinet cover a 40 Hz to 36 kHz range, while Class D amplification with 96 kHz DSP supports clear, low-distortion playback. Rear Low EQ and High EQ controls provide 16 combinations for adapting response to the room, and balanced XLR/TRS plus unbalanced RCA inputs accommodate common studio and DJ sources.
KEY FEATURES
Class D bi-amplification with 96 kHz DSP
Four Low EQ and four High EQ settings
Aramid-fibre woofer with Vortex Bass Accelerator
Constant-directivity horn for broad, uniform coverage
Rigid 4 mm aluminium front baffle
ESSENTIAL SPECIFICATIONS
Speaker type: Bi-amp 2-way active speaker
Enclosure: Bass reflex
Woofer: 5.25-inch (133 mm) aramid cone
Tweeter: 1-inch (25 mm) soft dome
Frequency range: 40 Hz–36 kHz
Maximum sound pressure: 107 dB
Balanced input: 1 × XLR/TRS combination socket
Unbalanced input: 1 × RCA socket
Input impedance: 10 kΩ
SIZE & WEIGHT
Width: 198 mm
Height: 300 mm
Weight: 5.5 kg
POWER
Power supply: AC 100–240 V, 50/60 Hz
Power consumption: 30 W
Standby power consumption: 0.3 W or less
Amplifier output: LF: 30 W / 4 Ω; HF: 30 W / 4 Ω
STUDIO MONITORS
5” Bluetooth Desktop Monitor Dpeaker Dystem
[DETAILS]
The Pioneer DJ DM-50D-BT is a pair of 2-way active desktop monitor speakers designed for DJ practice and music production. A Class D amplifier with 96 kHz DSP powers the 5-inch woofers, while a selectable switch adapts the DSP for DJ or Production use. Bluetooth 5.0 enables wireless playback, and wired sources connect through balanced 1/4-inch TRS, RCA, or 3.5 mm inputs. DECO diffusers and grooved ducts support broad high-frequency dispersion and controlled bass.
KEY FEATURES
Selectable DJ and Production sound modes
Bluetooth 5.0 wireless audio connectivity
Class D amplification with 96 kHz DSP
5-inch woofers and 3/4-inch soft-dome tweeters
TRS, RCA and 3.5 mm audio inputs
ESSENTIAL SPECIFICATIONS
Type: 2-way active speaker system
Enclosure: Bass reflex
Frequency range: 55 Hz–22 kHz (-10 dB)
Maximum sound pressure: 106 dB at 1 m, calculated peak value
Drivers: 127 mm woofer; 19 mm soft-dome tweeter
Inputs: 1 × 1/4-inch TRS, 1 × RCA, 1 × 3.5 mm stereo mini jack
Bluetooth: Bluetooth 5.0; A2DP and AVRCP; SBC, AAC, aptX and aptX Low Latency codecs
SIZE & WEIGHT
Dimensions: Lch: 175 × 262 × 257 mm; Rch: 175 × 262 × 247 mm (W × H × D)
Weight: Lch: 3.9 kg; Rch: 3.5 kg
POWER
Power supply: AC 100–240 V, 50/60 Hz
Power consumption: 25 W
Standby power consumption: 0.3 W or less
Amplifier output: Lch: 25 W / 4 Ω; Rch: 25 W / 4 Ω
Included power accessory: Power cord × 1
STUDIO MONITORS
5-inch Desktop Monitor Speaker System
[DETAILS]
The Pioneer DJ DM-50D is a compact active monitor system designed for DJing and music production. Its Class D amplifier and 96 kHz DSP drive 5-inch fiberglass woofers, while DECO convex diffusers distribute high frequencies across a wide listening area. A dedicated switch changes the DSP between DJ and Production modes. Balanced TRS and unbalanced RCA and mini-jack inputs accommodate controllers, mixers, computers, and audio interfaces, with front-mounted headphone and level controls providing convenient everyday operation.
KEY FEATURES
Switchable DJ and Production DSP modes
Class D amplification with 96 kHz DSP
5-inch fiberglass-cone woofers
DECO convex diffusers for wide high-frequency dispersion
Front headphone output and level control
ESSENTIAL SPECIFICATIONS
Type: 2-way bass-reflex active monitor speakers
Frequency range: 55 Hz–22 kHz (-10 dB)
Maximum sound pressure: 106 dB at 1 m, calculated peak value
Woofer: 5-inch (127 mm) fiberglass cone
Tweeter: 3/4-inch (19 mm) soft dome
Input terminals: 1 × 1/4-inch TRS, 1 × RCA, 1 × 3.5 mm stereo mini jack
Output terminal: 1 × 3.5 mm stereo mini jack
SIZE & WEIGHT
Dimensions: Left: 175 × 262 × 257 mm; right: 175 × 262 × 247 mm (W × D × H)
Weight: Left: 3.9 kg; right: 3.5 kg
POWER
Power supply: AC 110–240 V, 50/60 Hz
Power consumption: 25 W
Standby power consumption: 0.3 W or less
Amplifier output: Left: 25 W / 4 Ω; right: 25 W / 4 Ω
STUDIO MONITORS
Bluetooth Desktop Monitor System
[DETAILS]
The DM-40D-BT is a compact two-way active monitor system designed for DJ practice, music production and everyday listening. Each speaker combines a 4-inch woofer with a Class D amplifier and 96 kHz sampling DSP. A selectable sound-mode switch optimizes the DSP response for either DJing or production. Bluetooth provides wireless playback, while RCA and 3.5 mm inputs accommodate wired equipment. Front-mounted headphone and level controls keep routine adjustments within easy reach.
KEY FEATURES
Selectable DJ and Production sound modes
Bluetooth 5.0 wireless audio connectivity
Class D amplification with 96 kHz sampling DSP
DECO convex diffusers for a wide listening area
Front headphone output and level control
ESSENTIAL SPECIFICATIONS
Speaker type: 2-way active speaker
Enclosure: Bass reflex
Woofer: 4-inch (102 mm) cone
Tweeter: 3/4-inch (19 mm) soft dome
Frequency range: 60 Hz–20 kHz (-10 dB)
Maximum sound pressure: 106 dB at 1 m, calculated peak value
Input terminals: RCA pin jack × 1; 3.5 mm stereo mini jack × 1
Bluetooth: Bluetooth Specification Version 5.0
Bluetooth codecs: SBC and AAC
SIZE & WEIGHT
Dimensions: Lch: 146 × 227 × 223 mm; Rch: 146 × 227 × 212 mm (W × H × D)
Weight: Lch: 2.5 kg; Rch: 2.2 kg
POWER
Supported voltage: AC 100–240 V, 50/60 Hz
Power consumption: 20 W
Standby power consumption: 0.3 W or less
Amplifier output: Lch: 19 W / 4 Ω; Rch: 19 W / 4 Ω
STUDIO MONITORS
4-inch desktop monitor system
[DETAILS]
The DM-40D is a compact pair of two-way active desktop monitors designed for DJ practice and music production. Its switchable DJ and Production modes adjust the DSP response for each application. A Class D amplifier with 96 kHz processing drives 4-inch fiberglass woofers, while DECO diffusers distribute high frequencies across a wide listening area. RCA and 3.5 mm inputs accommodate common DJ and studio equipment, with front-mounted volume control and headphone access simplifying everyday use.
KEY FEATURES
Switchable DJ and Production DSP modes
Class D amplification with 96 kHz DSP
DECO diffusers for wide high-frequency dispersion
Grooved bass ducts reduce air friction
Front-mounted volume control and headphone socket
ESSENTIAL SPECIFICATIONS
Type: 2-way active desktop monitor system
Woofer: 102 mm (4-inch) fiberglass cone
Frequency range: 60 Hz–20 kHz (-10 dB)
Maximum sound pressure: 106 dB at 1 m (calculated peak value)
Input terminals: 1 × RCA pin jack; 1 × 3.5 mm stereo mini jack
SIZE & WEIGHT
Dimensions: Lch: 146 × 227 × 223 mm; Rch: 146 × 227 × 212 mm (W × H × D)
Weight: Lch: 2.5 kg; Rch: 2.2 kg
POWER
Power supply: AC 100–240 V, 50/60 Hz
Power consumption: 20 W
Standby power consumption: 0.3 W or less
Amplifier output: Lch: 19 W / 4 Ω; Rch: 19 W / 4 Ω
DJ CONTROLLERS
2-channel DJ controller
[DETAILS]
Designed as a compact two-channel controller, the Pioneer DJ DDJ-FLX4 works with computers and mobile devices and supports rekordbox, djay, Serato DJ Lite, and Traktor Play. Its familiar control layout pairs eight performance pads per deck with Smart Fader and Smart CFX tools that simplify transitions and effect combinations. A built-in audio interface provides RCA master and headphone outputs, while microphone audio can be mixed into the USB output for streamlined live streaming. USB-C connectivity also supports bus-powered computer operation.
KEY FEATURES
Compatible with rekordbox, djay, Serato DJ Lite and Traktor Play
PC, Mac, iOS and Android device support
Smart Fader and Smart CFX mixing controls
Eight backlit performance pads per deck
Built-in audio interface with USB microphone audio output
ESSENTIAL SPECIFICATIONS
Channels: 2
Frequency response: 20 Hz–20 kHz
Signal-to-noise ratio: 103 dB (USB)
Sampling rate: 44.1 kHz / 48 kHz
Audio converters: 16-bit / 24-bit A/D and D/A
Inputs: 1 × microphone input (1/4-inch TS jack)
Outputs: 1 × RCA master output; 1 × 3.5 mm stereo headphone output
USB: 2 × USB Type-C
Bluetooth: Bluetooth Low Energy, 2.4 GHz
SIZE & WEIGHT
Dimensions: 482 × 272.8 × 59.2 mm (W × D × H)
Weight: 2.1 kg
POWER
Power supply: DC 9 V, 3 A via USB power adapter; DC 5 V, 500 mA via USB bus power
DJ CONTROLLERS
Scratch-style 2-channel Serato DJ controller
[DETAILS]
The Pioneer DJ DDJ-REV1 is a two-channel controller built around a battle-style layout for Serato DJ Lite. Horizontal 60 mm tempo sliders, mixer-positioned Performance Pads and 154 mm jog wheels create a scratch-focused workspace. Lever FX enables momentary or locked effects, while Tracking Scratch automatically returns a track to its cue point during practice. Its microphone signal is combined with master audio and routed to the computer, supporting spoken or vocal input in streamed sets without a separate mixer or sound card.
KEY FEATURES
Battle-style layout with horizontal 60 mm tempo sliders
154 mm jog wheels designed for scratching
Lever FX with momentary and locked operation
Tracking Scratch automatically returns tracks to their cue points
Mixed microphone and master audio output for streaming
ESSENTIAL SPECIFICATIONS
Compatible software: Serato DJ Lite; Serato DJ Pro supported with separate license or subscription
Frequency response: 20 Hz–20 kHz
Signal-to-noise ratio: 103 dB (USB)
Total harmonic distortion: 0.005%
Input: 1 × microphone input (1/4-inch TS jack)
Outputs: 1 × master output (RCA); 1 × headphones output (3.5 mm stereo mini jack)
USB: 1 × USB Type-B
SIZE & WEIGHT
Dimensions: 526.0 × 255.5 × 59.2 mm (W × D × H)
Weight: 2.1 kg
POWER
Power supply: USB Type-B bus powered
Power consumption: 5 V, 500 mA
DJ CONTROLLERS
Compact 2-channel DJ controller
[DETAILS]
The DDJ-FLX2 is a compact 2-channel DJ controller designed for learning, mixing, and performing with a smartphone, tablet, PC, or Mac. It supports several popular DJ applications and compatible music-streaming services, while Smart CFX and Smart Fader simplify effects and transitions. Performance Pads, dedicated jog wheels, and an accessible control layout provide hands-on mixing. Bluetooth MIDI offers a convenient mobile connection, while USB-C supports audio, control, and bus-powered operation in a lightweight 1.2 kg design.
KEY FEATURES
Works with rekordbox, djay, Serato DJ Lite, Serato DJ Pro, and Traktor Play
Smart CFX enables effect techniques through the Performance Pads
Smart Fader automatically adjusts volume, BPM, and bass during transitions
Supports smartphones, tablets, PCs, and Macs
Bluetooth Low Energy MIDI connectivity
ESSENTIAL SPECIFICATIONS
Channels: 2
Frequency response: 20 Hz–20 kHz (USB)
Signal-to-noise ratio: 102 dB (USB)
Total harmonic distortion: 0.006% (USB)
Connections: MASTER 3.5 mm stereo mini jack, PHONES 3.5 mm stereo mini jack, USB Type-C
Wireless system: Bluetooth Low Energy
SIZE & WEIGHT
Dimensions: 383.2 × 208 × 48.2 mm (W × D × H)
Weight: 1.2 kg
POWER
Power supply: USB bus power
Power consumption: DC 5 V, 500 mA
DJ CONTROLLERS
4-channel professional DJ controller
[DETAILS]
The DDJ-FLX10 is a 4-channel performance controller for rekordbox, Serato DJ Pro, and djay Pro. Dedicated STEMS controls let DJs isolate, adjust, transfer, and apply effects to vocals, drums, or instruments during live mashups. Its customizable On Jog Displays provide deck, waveform, artwork, and performance information, while multicolored jog rings offer clear visual feedback. Mix Point Link supports precisely timed transitions, and the integrated DMX output enables direct control of compatible lighting through rekordbox.
KEY FEATURES
Dedicated STEMS controls for vocals, drums, and instruments
Customizable On Jog Displays with four display modes
Mix Point Link for timed rekordbox transitions
Integrated DMX output for rekordbox Lighting
Four-sensor MAGVEL FADER system
ESSENTIAL SPECIFICATIONS
Channels: 4
Compatible software: rekordbox, Serato DJ Pro, djay Pro
Frequency response: 20 Hz–20 kHz
USB: 2 × USB Type-C
Other connection: 1 × DMX OUT (3-pin XLR)
SIZE & WEIGHT
Dimensions: 716 × 400.3 × 73.4 mm (W × D × H)
Weight: 6.7 kg
POWER
Power supply: AC adapter (DC 12 V)
Power consumption: 1800 mA
DJ CONTROLLERS
4-channel club-inspired DJ controller
[DETAILS]
The AlphaTheta DDJ-GRV6 is a 4-channel DJ controller designed around a club-inspired CDJ and DJM layout. Its 206 mm jog wheels, eight Performance Pads per deck, four-channel mixer, and Beat FX controls support expressive multi-deck performances. Groove Circuit enables live manipulation of drum parts in rekordbox, while Serato DJ Pro users can apply effects to individual stems. A built-in audio interface, dual USB Type-C ports, and compatibility with computers and mobile devices provide flexible setup options.
KEY FEATURES
Groove Circuit for live drum remixing
206 mm jog wheels with eight Performance Pads per deck
Four-channel mixer with dedicated EQ, faders, and Beat FX
Smart Rotary Selector with multidirectional library navigation
Built-in audio interface with class-compliant operation
ESSENTIAL SPECIFICATIONS
Channels: 4
Deck control: 4 / Dual
Jog wheel: 206 mm
Frequency response: 20 Hz–20 kHz (USB)
Signal-to-noise ratio: 104 dB (USB)
Total harmonic distortion: 0.003% (USB)
Inputs: 1 × microphone input (1/4-inch TRS)
Outputs: 2 × master, 1 × booth, 2 × headphones
USB: 2 × USB Type-C
SIZE & WEIGHT
Dimensions: 711.4 × 375.9 × 75.7 mm (W × D × H)
Weight: 4.6 kg
POWER
Power supply (USB power adapter): DC 9 V, 3.0 A
Power supply (USB bus power): DC 5 V, 1.5 A
DJ CONTROLLERS
Scratch-style professional DJ controller
[DETAILS]
The DDJ-REV7 is a two-channel professional DJ controller built around large motorized jog wheels and a battle-style layout inspired by a DJM-S mixer with PLX turntables. Each deck adds a 3.5-inch On Jog Display, while the MAGVEL FADER PRO supports precise crossfader control. Four built-in Instant Scratch samples work without a connected computer, and 22 Beat FX broaden performance options. It supports both Serato DJ Pro and rekordbox, with dual USB Type-B ports for switching between connected computers.
KEY FEATURES
Large motorized jog wheels with adjustable torque
3.5-inch LCD On Jog Displays
Adjustable MAGVEL FADER PRO crossfader
Four built-in Instant Scratch samples
22 built-in Beat FX
ESSENTIAL SPECIFICATIONS
Channels: 2
Compatible DJ software: Serato DJ Pro and rekordbox
Frequency response: 20 Hz–20 kHz
USB ports: 2 × USB Type-B
Audio inputs: 2 × LINE/PHONO, 2 × MIC, 1 × AUX
Audio outputs: 2 × MASTER, 1 × BOOTH, 2 × PHONES
SIZE & WEIGHT
Dimensions: 732 × 382.2 × 82.4 mm (W × D × H)
Weight: 10.7 kg
POWER
Power supply: AC 100–240 V, 50/60 Hz
Power consumption: DC 24 V, 1000 mA
Included power accessories: AC adapter and power cord
DJ CONTROLLERS
Scratch-style 2-channel performance DJ controller
[DETAILS]
The Pioneer DJ DDJ-REV5 is a two-channel performance controller designed for scratch and open-format DJing with Serato DJ Pro or rekordbox. Its large jog wheels, adjustable Jog Feel and MAGVEL FADER support precise hands-on control, while the battle-style layout places performance pads and effect levers in the mixer section. Dedicated Stems controls enable live mashups, Auto BPM Transition assists with major tempo changes, and Piano Play turns the pads into a playable pitch layout. Dual computer connections support smooth DJ changeovers.
KEY FEATURES
Large jog wheels with playhead displays and adjustable Jog Feel
MAGVEL FADER and scratch-style control layout
Dedicated Stems Mute/Solo, Separate and Level controls
Auto BPM Transition for mixing between different tempos
Piano Play mode with 16 Performance Pads and three scales
ESSENTIAL SPECIFICATIONS
Compatible software: Serato DJ Pro; rekordbox
Frequency response: 20 Hz–20 kHz
Inputs: AUX: 1 × RCA; MIC: 1 × XLR/1/4-inch TRS combination jack and 1 × 1/4-inch TRS jack
Outputs: MASTER: 1 × XLR and 1 × RCA; BOOTH: 1 × 1/4-inch TRS; PHONES: 1 × 1/4-inch stereo and 1 × 3.5 mm stereo mini jack
USB: 3 × USB Type-C: 2 for PC/Mac connection and 1 for power supply
SIZE & WEIGHT
Dimensions: 736 × 377.2 × 73.4 mm (W × D × H)
Weight: 6.2 kg
POWER
Power supply: AC adapter: DC 5 V, 3.0 A / DC 9 V, 3.0 A / DC 12 V, 3.0 A / DC 15 V, 3.0 A / DC 20 V, 2.25 A
Power consumption: 3 A
DJ CONTROLLERS
DJ performance pad sub-controller
[DETAILS]
The DDJ-XP2 is an add-on controller built to extend rekordbox and Serato DJ Pro performance workflows. Its 32 multicolored Performance Pads provide tactile access to Hot Cues, Beat Jump, Slicer and other pad functions, while Slide FX strips enable direct effect control. Transport mode maps playback, cue and pitch commands to the pads, and 16-pad modes can combine two functions per deck in Serato DJ Pro. Silent Cue and DJM-S9-derived loop controls support fast, hands-on mixing and scratch-oriented setups.
KEY FEATURES
32 multicolored, low-latency Performance Pads
Compatible with rekordbox and Serato DJ Pro
Touch-sensitive Slide FX control strips
Transport and Serato DJ Pro 16-pad modes
Silent Cue and DJM-S9-derived loop controls
ESSENTIAL SPECIFICATIONS
Compatible software: rekordbox, Serato DJ Pro
USB: USB Type-B × 1
Included accessories: USB cable and Quick Start Guide
SIZE & WEIGHT
Dimensions: 333.0 × 235.0 × 42.0 mm (W × D × H)
Weight: 1.5 kg
POWER
Power supply: USB bus power
STUDIO MONITORS
8-inch Active Monitor Speaker
[DETAILS]
The VM-80 is a bi-amplified two-way monitor designed for DJ practice and music production. Its 8-inch aramid-fibre woofer and Vortex Bass Accelerator deliver controlled, responsive low frequencies, while a constant-directivity horn supports broad, uniform mid and high-frequency coverage. A Class D amplifier with 96 kHz DSP provides low-distortion reproduction. Rear Low EQ and High EQ controls offer 16 combinations for adapting the response to different rooms, from flatter studio monitoring to stronger club-style bass.
KEY FEATURES
Class D amplification with 96 kHz DSP
8-inch aramid-fibre woofer with Vortex Bass Accelerator
Constant-directivity horn for broad sound coverage
16 Low EQ and High EQ combinations
Rigid 4 mm aluminium front baffle
ESSENTIAL SPECIFICATIONS
Speaker type: Bi-amp 2-way active speaker
Enclosure: Bass reflex
Woofer: 8-inch (203 mm) aramid cone
Tweeter: 1-inch (25 mm) soft dome
Frequency range: 34 Hz–36 kHz
Maximum sound pressure: 115 dB
Balanced input: 1 × XLR/TRS combo
Unbalanced input: 1 × RCA
Input impedance: 10 kΩ
SIZE & WEIGHT
Dimensions: 267 × 400 × 325 mm (W × H × D)
Weight: 9.7 kg
POWER
Power supply: AC 100–240 V, 50/60 Hz
Amplifier output: LF: 90 W at 4 Ω; HF: 30 W at 4 Ω
Power consumption: 60 W
Standby power consumption: 0.3 W or less